Clean your garage door properly
So when was the last time that you cleaned your garage door? If you’re surprised at the question then you might want to check on your garage door ASAP. You’ll probably see that it’s already seriously dirty. Letting the elements – such as the wind or the rain – take care of it just won’t suffice anymore.
Now that you’ve finally noticed how dirty your garage door is, what can you do about it? The time has come to clean your garage door and you’ve got an opportunity to do it yourself. All you require now are some useful tips and a few tricks on how to do it the right way.
Here’s how to clean your garage door properly:
How to Clean a Steel Garage Door
The following are the steps that you need to follow if your garage door is made from pre-finished steel.
Step #1: Prepare one cup of mild detergent solution. The solution should contain less than 0.5 percent phosphate and five gallons of water. Use the solution to remove dirt and grime by wiping down the garage door.
Step #2: For oil stains, use a solution of diluted bleach and water. Make sure that the garage door is completely rinsed so that the detergent and the bleach wouldn’t mix. When the stains are gone, you can rinse the door again.
Step #3: Don’t forget to include the top, sides, and behind the weather stripping of the garage door.
Step #4: If you find dirt that has caked on the door, you can easily remove it with just your hands or get any simple tool to help with the removal.
Step #5: Get a non-abrasive piece of sponge or cloth and use it to clean the garage door.
Step #6: Dry off the garage door using a dry piece of cloth after you’ve rinsed it.
How to Clean a Wooden Garage Door
The following are the steps that you need to follow to clean a wooden garage door properly.
Step #1: Use a solution that’s made up of mild detergent and water. Get a clean sponge and soak it into the solution before wiping away any dirt and debris on the door’s surface.
Step #2: Rinse the door thoroughly with the use of a light garden hose. Allow the garage door to dry completely.
Step #3: If you see that your garage door’s finish is already eroded or thinning, you can use the detergent solution to clean it before letting it dry. After it has dried, use an oil/alkyd primer for priming the affected areas. Follow it up either with complete priming or a coating of finish.
Step #4: Finish the cleaning procedure with a coat of finish, particularly if no eroded patches can be found on your wooden garage door.
Follow the steps above in order to clean your garage door properly. It really shouldn’t be a complicated process as long as you do it the right way and you use the right tools for the job. Or visit your nearest garage door repair services Wise County TX for any Services you might need.