Removing Garage Door Panel
Due to their highly mobile nature, garage door parts are susceptible to damage, metal fatigue, distortions, and other damage periodically. They all require replacement frequently. Prior to their replacements will be completed, they should be taken off.
The next article will explain, in a step-wise manner, the steps to take off the garage door’s panels to inform homeowners and visitors about what to do in the event that their garage door panels experience problems.
To complete these steps to be successful, you will require the tools listed below, and the equipment is needed: ladder, vise clamps, hammers and ratcheting nut drivers, bits and power drills, knee pads, scrap boards of 2-by-4 inches, and a garage door section with four panels.
Step 1: Turn off an Automatic Garage Door Opener
To avoid shock, the garage door opener must be shut off by disconnecting the power as well as the central arm. This can be done by first lifting the door.
Step 2: Remove the Tension Springs
This is the process of separating the tension springs from turnbuckles that keep them in place with the help of drills powered by electricity and bits. Because the tension springs contain a significant amount of energy it is important to take care to prevent any accidents.
Step 3 Step III: Reduce the Doors
The door is then gently lowered with the aid of two 2-by-4 inch boards to about 3 – or 4-inches above the ground, to allow for getting rid of the lower panel.
Step 4: Secure the upper parts of the Garage Door.
This can be done by attaching vice clamps on the tracks for garage doors which are under the bearings on the two panels. This will keep that the doors fall down when the props of 2-by-4 inches are removed.
Step V Unlock bolts from the brackets.
It is best to do this by making use of a ratcheting driver. It is designed to assist in getting rid of the bottom panel.
Step Six: Take off the Panel
The garage door panel must eventually be removed by losing the bolts holding the lower panels to the brackets in the middle. The garage door can be opened for a repair to the garage door panel or the installation of a garage door panel.
Action Call Action
The typical homeowner may not possess all the tools needed to carry out the mentioned tasks. That, coupled with the dangers involved in this job or the removal of the garage door panels and the absence of expertise in the field for the average homeowner will make outsourcing service to a certified garage door service is by no means a necessity.
The Austin, Texas area and its surrounding areas The Austin Home Garage Doors business are the most prominent because it has an abundance of knowledge due to operating for quite a while and is in possession of the necessary tools required to complete the tasks at hand; and also has an expert team of and trained technicians.